Charles Schulz signature
Charles Schulz’s iconic ‘SCHULZ’ signature uses thick, slightly forward-leaning capital letters drawn with cartoonist brush weight.
What does Charles Schulz’s signature look like?
Charles Schulz’s iconic ‘SCHULZ’ signature uses thick, slightly forward-leaning capital letters drawn with cartoonist brush weight. The central H and U share a brisk upward rhythm before the wide Z tail sweeps right.
- Slant
- +26°forward
- Baseline
- +3.2°rising
- Width / height
- 3.58 : 1overall proportions
- Opening height
- 1.75×opening versus body letters
Charles Schulz signature and handwriting analysis
Charles Schulz’s signature sample has 26° of forward slant, a rising baseline and 0 enclosed loops. Comparing autograph strokes, baseline angle (+3.2°), slant (+26°), opening ratio (1.75×) and enclosed loops (0) reveals how individual signature traits contrast with standard handwriting features. Use the layers to follow the writing line, letter band, slant and enclosed loops.
- Slantforward
- +26°
- Baselinerising
- +3.2°
- Width / heightoverall proportions
- 3.58 : 1
- Opening heightopening versus body letters
- 1.75×
- Enclosed loopsclosed spaces in the image
- 0
- Ink groupsmain disconnected groups
- 6
- Ink densityinside the signature bounds
- 25.7%
- Underlinelower flourish
- 23% of width
- Finish heightrelative to the letter body
- +0.32×
Opening, letter body and finish
The opening stays near the height of the body letters. The opening-to-body ratio is 1.75×, while the whole image is 3.58 times as wide as it is tall. The rightmost ink finishes above the writing line; look at this ending separately from the slant of the letters themselves.
Loops and the lower flourish
The sample contains 0 enclosed loops and 6 main ink groups. The lower flourish spans about 23% of the full ink width, giving the name another line to follow beneath its letters.
All 11 measured signature features
Slant
+26°Angle of the letter strokes from vertical. Positive angles lean right; negative angles lean left.
The signature has a forward slant (+26°). The blue-green guides show the lean of strokes across the name.
Baseline
+3.2°Direction of the writing line from the beginning to the end of the signature.
The writing line rises (+3.2°). The red guide follows the base of the letters, separate from lower loops and flourishes.
Opening capital
1.8×Height of the opening letter relative to the typical letters that follow. 1× means similar heights.
The opening stands 1.8 times as high as the following letters. The purple box marks its area; the dashed blue guide marks the letter-body band.
Enclosed loops
0Closed spaces surrounded by ink, counted across the whole signature.
No enclosed loops are detected. Compare the open curves and joined strokes in the sample.
Ink groups
6Separate connected areas of ink in the image. Dots or detached letters can form additional groups.
The signature contains 6 main ink groups. The visible ink is divided into separate shapes. Look at where those shapes join or separate.
Ink density
26%Share of the signature’s enclosing rectangle occupied by ink.
Ink covers 26% of the measured signature area; the rest is open space. This describes how filled the shape is, rather than how hard the pen pressed.
Underline / flourish
23% wideLength of a lower underline or flourish compared with the full signature width.
A lower underline or flourish spans about 23% of the name’s width. Its highlighted area shows how much emphasis sits beneath the letters.
Finish height
+0.3×Height of the rightmost ending above or below the baseline, in typical letter heights. Positive is above; negative is below.
The ending sits close to the writing line (+0.3 letter heights). The orange guide locates the finish relative to the red baseline.
Width / height
3.6 : 1Full ink width divided by full ink height, including the signature’s tall and low strokes.
The shape is 3.6 times as wide as it is high. Its ink spans 1122 × 313 image pixels. Compare the horizontal spread with the vertical reach of the capitals and loops.
Ornamentation
2.7×Total traced stroke length divided by signature width. More turns and retraced shapes add length.
The traced strokes total 3,044 pixels, about 2.7 times the signature’s width. Look for loops, turns and flourishes that add movement within that width.
Angularity
2.4Number of corners per 100 pixels of traced ink outline. Higher values indicate more frequent sharp turns.
The outline contains about 2.4 corners per 100 pixels. Inspect the turns in the pen-path layer and compare pointed changes of direction with rounded curves.
Charles Schulz’s signature in graphology
In traditional graphology, signing with a bold all-capitals surname mark reflects graphic clarity, professional craftsmanship and a recognizable public stamp.
Follow the forward-leaning strokes in this image alongside the lower flourish. For another perspective on handwriting, the handwriting analysis tool brings slant, size and spacing into a full-page reading.
The signature has a forward slant (+26°). The writing line rises (+3.2°). The opening stands 1.8 times as high as the following letters. The ending sits close to the writing line (+0.3 letter heights).
Slant
+26°A forward lean is traditionally read as responsiveness and enthusiasm: movement toward people and goals.
Baseline
+3.2°A rising line is traditionally read as optimism and drive.
Opening capital
1.8×The opening introduces the name; its shape and proportion set the first visual emphasis.
Underline / flourish
23% wideAn underline is traditionally read as self-assurance and emphasis on the name.
Finish height
+0.3×The finish stays near the line, closing the name within its main writing band.
Ornamentation
2.7×An economical stroke path is traditionally read as directness: little added decoration.
Signatures with similar shapes
Compare these samples’ slant, proportions and letter rhythm with Charles Schulz’s autograph.
